Part-No: OLS1001
Description: Allows the import, modification and export of Vadis/VBF file
More information
Original Tester Import / Export
The car manufacturer are using systems to apply later update to the already delivered cars. The new data for the ECUs are stored in company specific files with own data formats.
With the new import/export plug-ins these files can now be analyzed and imported into WinOLS. Only the processor or eprom area will be shown in WinOLS as if it would be an eprom file. Modifications can be done as usual and the checksum can be corrected by the corresponding plug-in.
The finished file can be exported back into the original tester data format.
A possible checksum over the tester file will be corrected automatically.
Provided functions: Allows the import, modification and export of Vadis/VBF file
- Import VBF-Files
- Export VBF-Files
Attention: Even though all known checksums are corrected, we cannot guarantee that the exported tuning file can be programmed with VBF programming tools into the ECUs.
Version details
| Date | Version | * | Change |
| 08.07.2025 | 1.039 | Fixed | Crash with a specific file |
| 02.09.2024 | 1.038 | New | Memory layout improved in some cases |
| 28.11.2022 | 1.037 | New | Import improved for some Denso files |
| 14.02.2022 | 1.036 | Fixed | Address of empty area in special case corrected |
| 11.02.2022 | 1.035 | Fixed | Fillbyte default value could be wrong |
| 05.05.2021 | 1.034 | Fixed | File format checksum wasnt calculated correctly for some files |
| 02.03.2021 | 1.033 | New | Element-detection improved for large projects |
| 17.11.2020 | 1.032 | New | Improved element layout for 16MB files |
| 06.04.2020 | 1.031 | Fixed | Error in the element layout for some files |
| 09.12.2019 | 1.030 | Fixed | Some files could not be imported |
| 18.06.2019 | 1.029 | New | Another file variation supported |
| 04.06.2019 | 1.028 | Fixed | Element assignment improved |
| 27.12.2018 | 1.027 | Fixed | Possible error in element order could lead to overlapping elements |
| 14.12.2018 | 1.026 | New | Addresses for Tricore improved and elements reduced |
| 15.08.2018 | 1.025 | New | Address/Element corrections for more file variations |
| 07.08.2018 | 1.024 | New | Another format variation supported |
| 19.03.2018 | 1.023 | Fixed | Wrong element name when more that 50 elements |
| 06.12.2017 | 1.022 | Fixed | Checksum was sometimes wrong |
| 09.11.2017 | 1.021 | New | Support for MD1/MG1 files |
| 29.09.2017 | 1.020 | New | Improved compatibility: Compressed files are now recompressed on export. If they were imported with this version. |
| 12.09.2017 | 1.019 | Fixed | Uses the old memory layout for some Denso files |
| 08.09.2017 | 1.018 | New | Memory-Layout improved for Denso files |
| 07.09.2017 | 1.017 | New | Another format variation can be imported |
| 07.07.2017 | 1.016 | New | New internal file version supported |
| 16.06.2017 | 1.015 | Fixed | Error during element detection |
| 27.02.2017 | 1.014 | New | New internal filetype supported |
| 25.08.2016 | 1.013 | New | Calculation of additional checksum which is present in some files |
| 12.01.2016 | 1.012 | Fixed | Possible crash when exporting |
| 06.01.2016 | 1.011 | New | Internal improvements |
| 03.07.2014 | 1.010 | Fixed | Improved Simens file import regarding checksums |
| 14.05.2014 | 1.009 | Fixed | Problems with files with overlapping elements. |
| 02.04.2013 | 1.008 | Fixed | Possible crash for VBF files with overlapping elements. |
| 21.09.2012 | 1.007 | New | Import improved |
| 08.03.2012 | 1.006 | Fixed | Fixed crash on import |
| 01.09.2011 | 1.005 | Fixed | Improved element assignment at SID803 |
| 20.06.2011 | 1.003 | New | Filling of gaps with 00 at SID807 |
| 10.12.2008 | 1.002 | New | Element conversion improved |
| 04.12.2008 | 1.001 | Fixed | Problem at SID803 |
| 06.11.2008 | 1.000 | New |
Whatsapp: +84.899.402.402
Facebook: ECUTools.vn
Youtube: ECUToolsvn
Tiktok: ECUTools
Website: ECUTools.vn
Cart
(0 Product)
Related products
Reviews
There are no reviews yet.