In stock

Universal ECU Bench/Boot Cable

$80.20

Manufacturer

ECUTools Vietnam

List of accessories

Universal ECU Bench/Boot Cable

Warranty

3 months

Description

Reviews (0)

Image

Description

The Universal ECU Cable is designed specifically for professional technicians, providing comprehensive support for ECU diagnostics and programming. It is not just a simple connection tool but an optimized solution that enhances both efficiency and accuracy in daily operations.

The cable is fully compatible with Scanmatik 2 Pro, Scanmatik 3, and ECU read/write software such as PCMFlash and BitBox — especially suitable for systems requiring automatic power management. In addition, it supports permanent power supply for ECUs, making it convenient for use with MMC Flasher or bench diagnostics.

Power input via 2.5 mm jack connector
Built-in short-circuit protection
Supports up to 5A current load
Automatic power management and support for Boot and CNF signals
Independent control of ignition (IG) power line
Full OBD2 pinout, compatible with a wide range of diagnostic tools
Multiple connector types and wire sizes, suitable for most ECU types
Equipped with 3 status LEDs: Green: Power input, Red: ECU power output, Blue: Boot mode indicator

Product Image

Specifications

Power supply	12V or 24V
Connection	OBD2
Power consumption	Maximum 5A
Supported standards	J2534, RP1210
Supported protocols	ISO-9141/ISO-14230 (K-LINE, L-LINE); CAN; J1939, J1708
Weight	< 1kg
Dimensions	11×5.5×2.5cm (Wire length 50cm)

Pinout of Universal ECU Bench/Boot Cable:

Wire colors	Description	Note
Red	Power	2 small connector, 2 medium connector, 2 big connector, 1 round connector
Black	GND (Mass)	2 small connector, 2 medium connector, 2 big connector, 1 round connector
Pink	IG-Ignition	1 small connector, 1 medium connector, 1 big connector
White	CAN H	1 small connector, 1 medium connector
Green	CAN L	1 small connector, 1 medium connector
Yellow	K-Line	1 small connector, 1 medium connector
Blue with yellow stripe	L-Line	1 medium connector
Orange	GPT1, GPT2	2 small connector
Violet	VPP	1 medium connector
Grey	Boot1, Boot2	2 crocodile terminal black
Blue	CNF	1 crocodile terminal red
Brown	OBD2, OBD10, OBD12, OBD13, OBD8	5 medium connector

Comparison table of features of cable types provided by Ecutools.vn

The comparison table is based on manufacturer specifications and ECUTools.vn’s practical experience at the time of publication. Certain features may vary depending on the product version, firmware, or wiring configuration. All mentioned brands and trademarks are the property of their respective owners and are used solely for objective technical comparison purposes.

Feature	Universal ECU Bench/Boot Cable	Boot-Bench Connection cable Scanmatik 3	Universal ECU Bench Cable Chiptuningshop	Godiag GT100+	Powerbox for PCMFlash
Permanent Power Supply (B+)	✅	❌	✅	✅	✅
Ignition Power Supply (IGN)	✅	❌	✅	✅	✅
Automatic Power Management	✅	✅	❌	❌	✅
GPT Signal Pins	✅	✅	❌	❌	✅
CNF / Boot Signal Pins	✅	✅	✅	❌	✅
Number of CAN Signal Pairs	2 pairs	1 pairs	2 pairs	2 pairs	1 pairs
L-Line Signal	✅	❌	✅	✅	❌
Additional OBD2 Pins	✅	❌	❌	✅	❌