Module 37 - UAZ EDC16

Caption: 

• RD: Read
• WR: Write
• CK: Checksum correction

Supported ECU

• Patriot/Hunter 2.2L ZMZ 5143.1 (EDC16C39-6.H1) [ WR/CK ]
• Patriot 2.3L Iveco F1A (EDC16C39-5.A3) [ RD/WR/CK ]

“ ZMZ:

Hardware Number: 6H1-HW03

ECU Type: EDC16C39-6.H1

Catalog Number: 0281006291

VIN Number: 316380F10

Calibration: C45282A_

Software Version: 1037538674”

“ Iveco:

Hardware Number: EDC16C39 5.A3

ECU Type: EDC16C39-5.A3

Catalog Number: 0281014911

VIN Number: XTT31631090

Calibration: P_315

Software Version: 9.1.0

Calibration File: 1037378086P_315V91”

Important: When reprogramming a Patriot (facelift 2015), the instrument cluster must be put into test mode by holding the trip reset button while turning on the ignition. Additionally, in the case of a connection loss during writing, it is necessary to disconnect the power control unit (located on the right front pillar under the plastic cover, requiring two screws to be removed for access). Only the middle of the three connectors needs to be disconnected.

* Nguồn thông tin được phiên dịch và cập nhật nội dung bởi đội ngũ kỹ thuật viên ECUTools Việt Nam, không được sao chép dưới mọi hình thức. Mọi vấn đề liên hệ ECUTools Việt Nam hỗ trợ miễn phí cho bạn

ECUTools Việt Nam

Whatsapp: +84.899.402.402

Facebook: ECUTools.vn

Youtube: ECUToolsvn

Tiktok: ECUTools 

Website: ECUTools.vn