Còn hàng

China Trucks Continental SIDFA08/SIDFA10 Module

10.440.000 ₫

Nhà cung cấp

BitBox

Mô tả

Đánh giá (0)

Module phần mềm dùng để chỉnh sửa dữ liệu hiệu chỉnh (calibration) trên các ECU SIDFA08 and SIDFA10 dùng trên xe tải động cơ diesel và phương tiện công nghiệp từ thị trường Trung Quốc.

Loại ECU này có thể được đọc bằng BitBox module China Trucks Continental

Kích thước tệp được hỗ trợ – 8Mb.

Các map khả dụng:

1. Air calculation: Maximum Mass Flow Injection Limit for EGR
2. EGR: EGR Cooler Upstream Offset for Lambda, Estimated Target Position of EGR, Factor Engine Operation Correction for EGR, Mass Fraction of Soot with EGR, Maximum EGR Position with Throttle Valve Closed, Maximum Position EGR, Minimum EGR Position with Throttle Valve Closed, Minimum Position EGR, Minimum Position of EGR Valve, Position EGR Valve Minimum, Rate EGR Reference, Temperature EGR Cooler Baseline Upstream
3. Exhaust Gas Flow: Ventilation Map Factor for Exhaust Flow Weighting
4. Fuel: Fuel Quantity Limit Map for Turbocharger, Fuel Quantity Limit Map of Coolant Temperature
5. Protection: Fuel Quantity Protection, Fuel Quantity Protection Map of High Temperature, Maximum Fuel Quantity Protection Map, Minimum Main Fuel Injection of Post-Injection Offset
6. Injection: Correction Injection, Main Injection at Start, Main Injection Start Angle Base
7. Lambda: Lambda Demand Base, Lambda Reference
8. Limiters: Vehicle Speed (Test)
9. MAP Sensor: Air Intake Manifold Absolute Pressure
10. NOx: Concentration NOx With EGR, Concentration NOx Without EGR
11. Rail Pressure: Rail Pressure Control
12. Throttle Position: Maximum Throttle Position Baseline, Position Throttle Demand Baseline
13. Torque: Base Maximum Torque Calibration Map, Engine Map Torque, Fuel Drive Map Torque Performance Limit, Torque for Idle Driving Mode, Torque Model Loss External, Torque Request
14. Turbo System: Position Turbo High Pressure, Pressure Intake Demand Baseline, Pressure Turbo Calculated Offset Baseline for Overboost, Pressure Turbo Calculated Offset Baseline for Underboost, Turbocharger High Pressure Maximum Position, Turbocharger High Pressure Minimum Position
15. DTC